1 files changed, 0 insertions, 216 deletions
diff --git a/nagios-check-hpacucli b/nagios-check-hpacucli
deleted file mode 100755
index a347388..0000000
--- a/nagios-check-hpacucli
+++ /dev/null
@@ -1,216 +0,0 @@
-#!/usr/bin/perl -w
-
-# check _physical_ disk status of disks on HP smart array controllers
-# requires hpacucli
-#
-# does _not_ check raid status.  use arrayprobe for that.
-
-# Copyright (c) 2008 Peter Palfrader <peter@palfrader.org>
-#
-# Permission is hereby granted, free of charge, to any person obtaining
-# a copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sublicense, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-#
-# The above copyright notice and this permission notice shall be
-# included in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-use strict;
-
-# nagios exit codes
-my %CODE = (
-	'OK'            => 0,
-	'WARNING'       => 1,
-	'CRITICAL'      => 2,
-	'UNKNOWN'       => 3
-);
-
-my $EXITCODE = 'OK';
-
-$SIG{'__DIE__'} = sub {
-	print STDERR @_;
-	exit $CODE{'UNKNOWN'};
-};
-
-sub runcmd($) {
-	my ($cmd) = @_;
-	$cmd = "sudo hpacucli $cmd";
-	open(FH, $cmd."|") or die ("Cannot run $cmd: $!");
-	my @lines = <FH>;
-	close FH;
-	die ("no results from $cmd\n") if (scalar @lines == 0);
-	return \@lines;
-}
-
-sub record($) {
-	my ($newexit) = @_;
-	die "code $newexit not defined\n" unless defined $CODE{$newexit};
-
-	if ($CODE{$newexit} > $CODE{$EXITCODE}) {
-		$EXITCODE = $newexit;
-	};
-}
-
-
-my $ctrlallshow = runcmd("controller all show");
-my @controllers;
-for (@$ctrlallshow) {
-	chomp;
-	next if /^$/;
-	if (/in Slot ([0-9]+) /) {
-		push @controllers, $1;
-		next;
-	};
-	die ("Cannot read line '$_' gotten from hpacucli controller all show\n");
-};
-
-if (scalar @controllers == 0) {
-	print "UNKNONW: No smartarray controllers found with hpacucli\n";
-	exit $CODE{'UNKNOWN'}
-};
-
-my @resultstr;
-
-for my $slot (sort @controllers) {
-	my $pds = runcmd("controller slot=$slot pd all show");
-	my @drives;
-	my $nodrives = 0;
-	my %status;
-	for (@$pds) {
-		chomp;
-		next if /^$/;
-		next if (/^\S.*in Slot $slot/);
-		next if /^ *array [A-Z]$/;
-		if (/^ *(array [A-Z]) \(Failed\)$/) {
-			record('CRITICAL');
-			push @{$status{'Failed'}}, $1;
-		} elsif (/^Error: The specified controller does not have any physical drives on it.$/) {
-			$nodrives = 1;
-		} elsif (/^ *physicaldrive (\S+) .* (OK|Predictive Failure|Failed|Rebuilding)(?:, spare)?\)$/) {
-			my $drive = $1;
-			my $status = $2;
-			push @{$status{$status}}, $drive;
-			if ($status eq 'OK') {
-			} elsif ($status eq 'Predictive Failure' ||
-			         $status eq 'Rebuilding') {
-				record('WARNING');
-			} elsif ($status eq 'Failed') {
-				record('CRITICAL');
-			} else {
-				record('UNKNOWN');
-			};	
-			push @drives, $drive;
-		} else {
-			die ("Cannot read line '$_' gotten from hpacucli controller slot=$slot pd all show\n");
-		};
-	};
-
-	# Check that all drives have the proper transfer speed.
-	# sometimes stuff breaks and they fall back to 10mb/sec.
-	for my $drive (@drives) {
-		# skip drives that are known to have failed
-		next if (exists $status{'Failed'} && grep {$drive eq $_} @{$status{'Failed'}});
-		my $type;
-		if ($drive =~ /^[0-9]+:[0-9]+$/) { # scsi drives
-			$type = 'SCSI';
-		} elsif ($drive =~ /^[0-9]+I:[0-9]+:[0-9]+$/) { # SAS
-			$type = 'SAS';
-		} else {
-			# I'm not going to run pass arguments of unknown form to the shell..
-			warn ("Unknown diskdrive ID $drive\n");
-			next;
-		}
-
-		my $pd = runcmd("controller slot=$slot pd $drive show");
-		while (defined $pd->[0] && !($pd->[0] =~ /physicaldrive/)) {
-			shift @$pd;
-		};
-		shift @$pd;
-		my %value;
-		for (@$pd) {
-			if (m/^\s*(.*?):\s*(.*?)\s*$/) {
-				$value{$1} = $2;
-			}
-		}
-
-		my $key;
-		my $expected;
-		if ($type eq 'SCSI') {
-			$key = 'Transfer Speed';
-			if (!defined $value{'Transfer Mode'}) {
-				record('WARNING');
-				push @{$status{'unknown transfer mode'}}, $drive;
-				next;
-			} elsif ($value{'Transfer Mode'} eq 'Ultra 3 Wide') {
-				$expected = '160 MB/Sec';
-			} elsif ($value{'Transfer Mode'} eq 'Ultra 320 Wide') {
-				$expected = '320 MB/Sec';
-			} else {
-				record('WARNING');
-				push @{$status{'unknown transfer mode'}}, $drive."(".$value{'Transfer Mode'}.")";
-				next;
-			};
-		} elsif ($type eq 'SAS') {
-			$key = 'PHY Transfer Rate';
-			if ($value{'PHY Count'} eq '2') {
-				$expected = '3.0GBPS, Unknown';
-			} else {
-				$expected = '3.0GBPS';
-			}
-		} else {
-			warn "Should not be here.  Do not know what to do with type '$type'\n";
-			next;
-		}
-
-		if (!defined $value{$key}) {
-			record('WARNING');
-			push @{$status{'unknown transfer speed'}}, $drive;
-		} elsif ($value{$key} ne $expected) {
-			record('WARNING');
-			push @{$status{'bad transfer speed'}}, $drive."(".$value{$key}.")";
-		};
-	};
-
-	if ($nodrives && scalar keys %status > 0) {
-		push @resultstr, "Slot $slot: have no drives but status results?";
-		record('UNKNOWN');
-		next;
-	} elsif ($nodrives) {
-		push @resultstr, "Slot $slot: no drives";
-		next;
-	};
-
-	my $cst = runcmd("controller slot=$slot show status");
-	for (@$cst) {
-		chomp;
-		next if /^$/;
-		next if (/^\S.*in Slot $slot/);
-		if (/^ *(.*) Status: (.*)$/) {
-			my $system = $1;
-			my $status = $2;
-			push @{$status{$status}}, $system;
-			if ($status ne 'OK') {
-				record('WARNING');
-			};
-		} else {
-			die ("Cannot read line '$_' gotten from hpacucli controller slot=$slot show status\n");
-		};
-	};
-
-	my $status = join(" - ", (map { $_.": ".join(", ", @{$status{$_}}) } keys %status));
-	push @resultstr, "Slot $slot: $status";
-};
-
-print "$EXITCODE: ", join(" --- ", @resultstr), "\n";
-exit $CODE{$EXITCODE};