From b9905b7274b065b85eba0c8e972d17b29e870f90 Mon Sep 17 00:00:00 2001
From: Joerg Jaspert <joerg@debian.org>
Date: Mon, 4 Jan 2016 23:06:52 +0100
Subject: tracefile generation in a function, use it for stage1 file too

---
 bin/ftpsync | 120 ++++++++++++++++++++++++++++++++----------------------------
 1 file changed, 64 insertions(+), 56 deletions(-)

(limited to 'bin')

diff --git a/bin/ftpsync b/bin/ftpsync
index 6fbcbca..7d896c8 100755
--- a/bin/ftpsync
+++ b/bin/ftpsync
@@ -12,7 +12,7 @@ set -E
 # Based losely on a number of existing scripts, written by an
 # unknown number of different people over the years.
 #
-# Copyright (C) 2008-2012 Joerg Jaspert <joerg@debian.org>
+# Copyright (C) 2008-2016 Joerg Jaspert <joerg@debian.org>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -165,6 +165,66 @@ check_rsync() {
     esac
 }
 
+# Write a tracefile
+tracefile() {
+    local TRACEFILE=${1:-"${TO}/${TRACE}"}
+
+    case ${EXTENDEDTRACE} in
+        none)
+            log "No trace file wanted. Not creating one"
+            ;;
+        touch)
+            log "Just touching the trace file"
+            touch "${TRACEFILE}"
+            ;;
+        date|terse|full)
+            log "Creating a ${EXTENDEDTRACE} trace file"
+            if [ -d "$(dirname "${TRACEFILE}")" ]; then
+                {
+                    FILESOA=$(awk '/serial/ { print $3 }' ${TO}/project/trace/master || echo unknown )
+                    echo "Archive serial: ${FILESOA}"
+
+                    LC_ALL=POSIX LANG=POSIX date -u
+                    rfc822date=$(LC_ALL=POSIX LANG=POSIX date -u -R)
+                    echo "Date: ${rfc822date}"
+
+                    if [ "xdatex" != "x${EXTENDEDTRACE}x" ]; then
+                        echo "Used ftpsync version: ${VERSION}"
+                        echo "Running on host: ${TRACEHOST}"
+                        if [ "xfullx" = "x${EXTENDEDTRACE}x" ]; then
+                            GLOBALARCHLIST="source amd64 arm64 armel armhf hurd-i386 i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc ppc64el s390 s390x sparc"
+
+                            AEXCLUDE="^${ARCH_EXCLUDE// /\$|^}$"
+                            ARCHLIST=""
+                            for ARCH in ${GLOBALARCHLIST}; do
+                                if ! [[ ${ARCH} =~ ${AEXCLUDE} ]]; then
+                                    ARCHLIST="${ARCHLIST} ${ARCH}"
+                                fi
+                            done
+                            out="GUESSED:{${ARCHLIST}}"
+                            echo "Architectures: ${out}"
+                            echo "Upstream-mirror: ${RSYNC_HOST}"
+                            total=0
+                            for bytes in $(egrep 'Total bytes received: ' "${LOGDIR}/rsync-${NAME}.log" | awk -F: '{print $2}'); do
+                                bytes=${bytes//,}
+                                total=$((total + bytes))
+                            done
+                            echo "Total bytes received in rsync: ${total}"
+                            echo "Total time spent in rsync: ${STATS_TOTAL_RSYNC_TIME}"
+                            rate=$(( total / STATS_TOTAL_RSYNC_TIME ))
+                            echo "Average rate: ${rate} B/s"
+                        fi # full trace
+                    fi # other traces
+                } > "${TRACEFILE}.new"
+                mv "${TRACEFILE}.new" "${TRACEFILE}"
+            fi
+            ;;
+        *)
+            error "Unsupported EXTENDEDTRACE value configured in ${BASEDIR}/etc/${NAME}.conf, please fix"
+            ;;
+    esac
+
+}
 ########################################################################
 ########################################################################
 
@@ -532,6 +592,8 @@ while [ -e "${UPDATEREQUIRED}" ]; do
         exit 3
     fi
 
+    tracefile "${TO}/${TRACE}-stage1"
+
     HOOK=(
         HOOKNR=2
         HOOKSCR=${HOOK2}
@@ -612,62 +674,8 @@ done
 
 # We only update our tracefile when we had a stage2 or an all sync.
 # Otherwise we would update it after stage1 already, which is wrong.
-
 if [ "xtruex" = "x${SYNCSTAGE2}x" ] || [ "xtruex" = "x${SYNCALL}x" ]; then
-    case ${EXTENDEDTRACE} in
-        none)
-            log "No trace file wanted. Not creating one"
-            ;;
-        touch)
-            log "Just touching the trace file"
-            touch "${TO}/${TRACE}"
-            ;;
-        date|terse|full)
-            log "Creating a ${EXTENDEDTRACE} trace file"
-            if [ -d "$(dirname "${TO}/${TRACE}")" ]; then
-                {
-                    FILESOA=$(awk '/serial/ { print $3 }' ${TO}/project/trace/master || echo unknown )
-                    echo "Archive serial: ${FILESOA}"
-
-                    LC_ALL=POSIX LANG=POSIX date -u
-                    rfc822date=$(LC_ALL=POSIX LANG=POSIX date -u -R)
-                    echo "Date: ${rfc822date}"
-
-                    if [ "xdatex" != "x${EXTENDEDTRACE}x" ]; then
-                        echo "Used ftpsync version: ${VERSION}"
-                        echo "Running on host: ${TRACEHOST}"
-                        if [ "xfullx" = "x${EXTENDEDTRACE}x" ]; then
-                            GLOBALARCHLIST="source amd64 arm64 armel armhf hurd-i386 i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc ppc64el s390 s390x sparc"
-
-                            AEXCLUDE="^${ARCH_EXCLUDE// /\$|^}$"
-                            ARCHLIST=""
-                            for ARCH in ${GLOBALARCHLIST}; do
-                                if ! [[ ${ARCH} =~ ${AEXCLUDE} ]]; then
-                                    ARCHLIST="${ARCHLIST} ${ARCH}"
-                                fi
-                            done
-                            out="GUESSED:{${ARCHLIST}}"
-                            echo "Architectures: ${out}"
-                            echo "Upstream-mirror: ${RSYNC_HOST}"
-                            total=0
-                            for bytes in $(egrep 'Total bytes received: ' "${LOGDIR}/rsync-${NAME}.log" | awk -F: '{print $2}'); do
-                                bytes=${bytes//,}
-                                total=$((total + bytes))
-                            done
-                            echo "Total bytes received in rsync: ${total}"
-                            echo "Total time spent in rsync: ${STATS_TOTAL_RSYNC_TIME}"
-                            rate=$(( total / STATS_TOTAL_RSYNC_TIME ))
-                            echo "Average rate: ${rate} B/s"
-                        fi # full trace
-                    fi # other traces
-                } > "${TO}/${TRACE}.new"
-                mv "${TO}/${TRACE}.new" "${TO}/${TRACE}"
-            fi
-            ;;
-        *)
-            error "Unsupported EXTENDEDTRACE value configured in ${BASEDIR}/etc/${NAME}.conf, please fix"
-            ;;
-    esac
+    tracefile
 fi
 
 
-- 
cgit v1.2.3