#!/usr/bin/perl -w # # $Id$ # # This file is part of Echolot - a Pinger for anonymous remailers. # # Copyright (c) 2002, 2003, 2004 Peter Palfrader # # This program is free software. you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA $| = 1; =pod =head1 NAME pingd - echolot ping daemon =head1 SYNOPSIS =over =item B B =item B B =item B B =item B B I
[I
...] =item B B I
[I
...] =item B B I
[I
...] =item B B I
[I
...] =item B B option=value [option=value..] I
[I
...] =item B B I =item B B I
=item B B [I
[I
...]] =item B B [I
[I
...]] =item B B I
B<:>I
[I
B<:>I
...] =item B B =item B B =item B B =item B B =item B B =item B B =back =head1 DESCRIPTION pingd is the heart of echolot. Echolot is a pinger for anonymous remailers. A Pinger in the context of anonymous remailers is a program that regularily sends messages through remailers to check their reliability. It then calculates reliability statistics which are used by remailer clients to choose the chain of remailers to use. Additionally it collects configuration parameters and keys of all remailers and offers them in a format readable by remailer clients. When called without parameters pingd schedules tasks like sending pings, processing incoming mail and requesting remailer-xxx data and runs them at configurable intervalls. =head1 COMMANDS =over =item B Start the ping daemon. =item B Send the running pingd process a SIGTERM. =item B Sends a HUP signal to the daemon which instructs it to process the commands. For other effects of sending the HUP Signal see the SIGNALS section below. =item B I
[I
...] Add I
to the list of remailers to query for keys and confs. =item B I
[I
...] Delete I
from the list of remailers to query for keys and confs. Delete all statistics and keys for that remailer. Note that echolot will add back this remailer if it learns of it from other remailers again. If you do not want that, use the disable command. =item B I
[I
...] Shorthand for B B B. This makes echolot completely ignore that remailer, until you enable it again. =item B I
[I
...] Shorthand for B B B. =item B option=value [option=value..] I
[I
...] Possible options and values: =over =item B{B,B} Set B (show remailer in mlist, rlist etc.) for remailer I
to either B or B. =item B{B,B} Set B (send out pings to that remailer) for remailer I
to either B or B. =item B{B,B} Set B (fetch remailer-key and remailer-conf) for remailer I
to either B or B. =back =item B I Some remailers (Mixmaster V2 - currently lcs and passthru2) don't return a useable remailer-conf message. For such remailers you need to set it manually. For instance: ./pingd setremailercaps '$remailer{"passthru2"} = " mix middle";' ./pingd setremailercaps '$remailer{"lcs"} = " mix klen1000";' =item B I
Delete remailer-conf data for I
. The config data will be reset from the next valid remailer-conf reply by the remailer. =item B [I
[I
...]] Send a command to immediatly request keys and configuration from remailers. If no addresses are given requests will be sent to all remailers. =item B [I
[I
...]] Send a command to immediatly send pings to the given remailers. If no addresses are given requests will be sent to all remailers. =item B I
B<:>I
[I
B<:>I
...] Send a command to immediatly send chain pings to the given chains. A chain is two remailer addresses seperated by a colon. =item B Send a command to immediatly rebuild stats. =item B Send a command to immediatly rebuild the keyrings. =item B Send a command to immediatly rebuild the Thesaurus. =item B Send a command to immediatly rebuild the From Header lines page. =item B Print a status summary of all known addresses to the log (level notice). =item B Dumps the current configuration to standard output. =back =head1 OPTIONS =over =item B<--basedir> The home directory to which everything else is relative. See the BASE DIRECTORY section below. =item B<--verbose> Verbose mode. Causes B to print debugging messages about its progress. =item B<--quiet> Quiet mode. Be even quieter than normal. =item B<--help> Print a short help message and exit sucessfully. =item B<--version> Print version number and exit sucessfully. =item B<--nohup> Usefull only with the B, B, B, B, B, B, B, B, B, B, B, or B command. Don't send a HUP signal to the daemon which instructs it to process the commands after adding the command to the task list. By default such a signal is sent. =item B<--process> Usefull only with the B command. Read and process the commands file on startup. =item B<--detach> Usefull only with the B command. Tell B to detach. =back =head1 BASE DIRECTORY The home directory to which everything else is relative. Basedir defaults to whatever directory the B binary is located. It can be overridden by the B environment variable which in turn is weaker than the B<--basedir> setting. This directory is then used to locate the configuration file B (see FILES below). The B setting in B finally sets the base directory. =head1 FILES The configuration file is searched in these places in this order: =over =item the file pointed to by the B environment variable =item /pingd.conf =item $HOME/echolot/pingd.conf =item $HOME/pingd.conf =item $HOME/.pingd.conf =item /etc/echolot/pingd.conf =item /etc/pingd.conf =back =head1 ENVIRONMENT =over =item ECHOLOT_CONF echolot config file (see section FILES) =item ECHOLOT_HOME echolot base directory (see section BASE DIRECTORY) =back =head1 SIGNALS On B, B, and B B will schedule a shutdown for as soon as the current actions are finished or immediatly if no actions are currently being processed. It will then write all metadata and pingdata to disk and close all files cleanly before exiting. On B will execute any pending commands from the commands file (B by default). It also closes and reopens the file 'output' which is used for stdout and stderr when the daemon is running detached. This can be used if you want to rotate that file. =head1 AUTHOR Peter Palfrader Epeter@palfrader.orgE =head1 BUGS Please report them at EURL:http://alioth.debian.org/projects/echolot/E =cut use strict; use FindBin qw{ $Bin }; use lib ( $Bin, "$Bin/lib" ); use Getopt::Long; use English; use Carp; use Echolot::Config; use Echolot::Globals; use Echolot::Storage::File; use Echolot::Scheduler; use Echolot::Conf; use Echolot::Mailin; use Echolot::Pinger; use Echolot::Chain; use Echolot::Stats; use Echolot::Commands; use Echolot::Thesaurus; use Echolot::Fromlines; use Echolot::Report; use Echolot::Log; use POSIX qw(setsid); delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'}; my $VERSION = '2.1.8'; my $redirected_stdio = 0; sub setSigHandlers() { $SIG{'HUP'} = sub { Echolot::Log::info("Got SIGHUP. scheduling readcommands."); Echolot::Globals::get()->{'scheduler'}->schedule('readcommands', 0, time() ); if ($redirected_stdio) { close STDOUT; close STDERR; my $logfile = Echolot::Config::get()->{'logfile'}; open (STDOUT, ">>$logfile") or die ("Cannot open '$logfile' as STDOUT\n"); open (STDERR, ">&STDOUT") or die ("Cannot dup STDOUT as STDERR\n"); }; Echolot::Log::reopen(); }; $SIG{'INT'} = sub { Echolot::Log::info("Got SIGINT. scheduling exit."); Echolot::Globals::get()->{'scheduler'}->schedule('exit', 0, 0 ); }; $SIG{'QUIT'} = sub { Echolot::Log::info("Got SIGQUIT. scheduling exit."); Echolot::Globals::get()->{'scheduler'}->schedule('exit', 0, 0 ); }; $SIG{'TERM'} = sub { Echolot::Log::info("Got SIGTERM. scheduling exit."); Echolot::Globals::get()->{'scheduler'}->schedule('exit', 0, 0 ); }; $SIG{'PIPE'} = sub { Echolot::Log::error("Got SIGPIPE"); }; }; sub commit_prospective_address() { Echolot::Globals::get()->{'storage'}->commit_prospective_address(); }; sub expire() { Echolot::Globals::get()->{'storage'}->expire(); }; sub metadata_backup() { Echolot::Globals::get()->{'storage'}->metadata_backup(); }; sub command_adddelete(@) { my $command = shift @_; my @argv = @_; die ("command_adddelete requires command\n") unless defined $command; die ("add requires argument
\n") unless scalar @argv; my @addresses; for my $address (@argv) { die ("argument
is not a valid email address\n") unless ($address =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); push @addresses, $address; }; for my $address (@addresses) { Echolot::Commands::addCommand("$command $address"); }; }; sub command_set(@) { my @argv = @_; my @settings; while (scalar @argv && $argv[0] =~ /^(show(?:it)?|ping(?:it)?|fetch(?:it)?)=(on|off)$/) { my $name = $1; my $value = $2; $name = 'showit' if ($name eq 'show'); $name = 'pingit' if ($name eq 'ping'); $name = 'fetch' if ($name eq 'fetchit'); push @settings, "$name=$value"; shift @argv; }; my @addresses; for my $address (@argv) { die ("argument $address is not a valid email address\n") unless ($address =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); push @addresses, $address; }; for my $address (@argv) { for my $setting (@settings) { Echolot::Commands::addCommand("set $address $setting"); }; }; }; sub command_enabledisable (@) { my @argv = @_; my $command = shift @argv; my $value; if ($command eq 'enable') { $value='on'; } elsif ($command eq 'disable') { $value='off'; } else { die ("argument $command is not enable or disable. Shouldn't even be here.\n"); }; my @cmd = ("showit=$value", "pingit=$value", "fetch=$value"); push @cmd, @argv; command_set(@cmd); } sub command_setremailercaps(@) { my @argv = @_; my @caps; for my $caps (@argv) { my ($remailer_nick, $remailer_address) = ($caps =~ /^\s* \$remailer{"(.*)"} \s*=\s* "<(.*@.*)>.*"; \s*$/ix); die ("caps '$caps' is not a valid remailer caps line\n") unless (defined $remailer_nick && defined $remailer_address); push @caps, { address => $remailer_address, caps => $caps }; }; for my $caps (@caps) { Echolot::Commands::addCommand("setremailercaps ".$caps->{'address'}." ".$caps->{'caps'}); }; }; sub command_deleteremailercaps(@) { my @argv = @_; my @addresses; for my $address (@argv) { die ("argument $address is not a valid email address\n") unless ($address =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); push @addresses, $address; }; for my $address (@addresses) { Echolot::Commands::addCommand("deleteremailercaps $address"); }; }; sub command_getkeyconf(@) { my @argv = @_; my @addresses; for my $address (@argv) { die ("argument $address is not a valid email address\n") unless ($address =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); push @addresses, $address; }; push @addresses, 'all' unless (scalar @addresses); for my $address (@addresses) { Echolot::Commands::addCommand("getkeyconf $address"); }; }; sub command_sendpings(@) { my @argv = @_; my @addresses; for my $address (@argv) { die ("argument $address is not a valid email address\n") unless ($address =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); push @addresses, $address; }; push @addresses, 'all' unless (scalar @addresses); for my $address (@addresses) { Echolot::Commands::addCommand("sendpings $address"); }; }; sub command_sendchainpings(@) { my @argv = @_; my @args; for my $arg (@argv) { my ($addr1, $addr2) = split /:/, $arg; die ("Argument $arg is not in the form address1:address2") unless defined $addr1 && defined $addr2; die ("Address 1 in $arg ('$addr1') is not a valid email address\n") unless ($addr1 =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); die ("Address 2 in $arg ('$addr2') is not a valid email address\n") unless ($addr2 =~ /^[a-zA-Z0-9+._-]+\@[a-zA-Z0-9+.-]+$/ ); push @args, [ $addr1, $addr2 ]; }; for my $arg (@args) { Echolot::Commands::addCommand("sendchainpings $arg->[0] $arg->[1]"); }; }; sub pid_exists($) { my ($remove_stale) = @_; my $pidfile = Echolot::Config::get()->{'pidfile'}; if (! $remove_stale) { return (-e $pidfile); } else { if (!-e $pidfile) { return 0; }; open (PIDFILE, $pidfile) or die ("Cannot open pidfile '$pidfile': $!.\n"); my $line = ; close PIDFILE; my ($pid, $host, $time) = $line =~ /^(\d+) \s+ (\S+) \s+ (\d+) \s* $/x or die ("Cannot parse pidfile '$pidfile' line '$line'.\n"); (Echolot::Globals::get()->{'hostname'} eq $host) or die ("Pidfile exists and is from another host.\n"); ($host ne 'unknown') or die ("Pidfile exists and hostname is unknown.\n"); ($time < time()) or die ("Pidfile exists and timestamp is in the future.\n"); my $sent = kill 0, $pid; ($sent == 0) or die ("Pidfile exists and process $pid running.\n"); warn ("Removing stale pidfile.\n"); unlink ($pidfile) or die ("Removing stale pidfile $pidfile failed.\n"); return 0; } }; sub daemon_run($) { my ($process) = @_; Echolot::Log::logdie("Pidfile '".Echolot::Config::get()->{'pidfile'}."' exists\n") if pid_exists(0); open (PIDFILE, '>'.Echolot::Config::get()->{'pidfile'}) or Echolot::Log::logdie("Cannot open pidfile '".Echolot::Config::get()->{'pidfile'}."': $!"); print PIDFILE "$PROCESS_ID ".Echolot::Globals::get()->{'hostname'}." ".time()."\n"; close PIDFILE; Echolot::Globals::initStorage(); setSigHandlers(); Echolot::Globals::get()->{'scheduler'} = new Echolot::Scheduler; my $scheduler = Echolot::Globals::get()->{'scheduler'}; $scheduler->add('exit' , -1 , 0, 0, 'exit' ); $scheduler->add('readcommands' , -1 , 0, 1, \&Echolot::Commands::processCommands ); $scheduler->add('processmail' , Echolot::Config::get()->{'processmail'} , 0, 1, \&Echolot::Mailin::process ); $scheduler->add('ping' , Echolot::Config::get()->{'pinger_interval'} , 0, 0, \&Echolot::Pinger::send_pings ); $scheduler->add('chainping' , Echolot::Config::get()->{'chainpinger_interval'} , 0, 0, \&Echolot::Chain::send_pings ); $scheduler->add('buildstats' , Echolot::Config::get()->{'buildstats'} , 0, 1, \&Echolot::Stats::build_stats ); $scheduler->add('buildkeys' , Echolot::Config::get()->{'buildkeys'} , 0, 1, \&Echolot::Stats::build_keys ); $scheduler->add('buildthesaurus' , Echolot::Config::get()->{'buildthesaurus'} , 0, 1, \&Echolot::Thesaurus::build_thesaurus ); $scheduler->add('buildfromlines' , Echolot::Config::get()->{'buildfromlines'} , 0, 1, \&Echolot::Fromlines::build_fromlines ); $scheduler->add('metadata_backup' , Echolot::Config::get()->{'metadata_backup'} , 0, 1, \&metadata_backup ); $scheduler->add('commitprospectives' , Echolot::Config::get()->{'commitprospectives'} , 0, 1, \&commit_prospective_address ); $scheduler->add('expire' , Echolot::Config::get()->{'expire'} , 0, 1, \&expire ); $scheduler->add('getkeyconf' , Echolot::Config::get()->{'getkeyconf_interval'} , 0, 0, \&Echolot::Conf::send_requests ); $scheduler->add('check_resurrection' , Echolot::Config::get()->{'check_resurrection'} , 0, 0, \&Echolot::Conf::check_resurrection ); $scheduler->add('cleanup_tmp' , Echolot::Config::get()->{'cleanup_tmpdir'} , 0, 1, \&Echolot::Tools::cleanup_tmp ); $scheduler->add('summary' , Echolot::Config::get()->{'summary'} , 0, 1, \&Echolot::Report::print_summary ); Echolot::Globals::get()->{'scheduler'}->schedule('readcommands', 0, time() ) if ($process); $scheduler->run(); Echolot::Globals::get()->{'storage'}->commit(); Echolot::Globals::get()->{'storage'}->finish(); unlink (Echolot::Config::get()->{'pidfile'}) or Echolot::Log::warn ("Cannot unlink pidfile ".Echolot::Config::get()->{'pidfile'}."."); }; sub send_sig($) { my ($sig) = @_; die ("Pidfile '".Echolot::Config::get()->{'pidfile'}."' does not exist\n") unless pid_exists(0); open (PIDFILE, '<'.Echolot::Config::get()->{'pidfile'}) or confess ("Cannot open pidfile '".Echolot::Config::get()->{'pidfile'}."': $!\n"); my $line = ; close PIDFILE; my ($pid, $host, $time) = $line =~ /^(\d+) \s+ (\S+) \s+ (\d+) \s* $/x or confess ("Cannot parse pidfile '$line'\n"); my $sent = kill $sig, $pid; ($sent == 1) or confess ("Did not send signal $sig to exactly one process but $sent. (pidfile reads $line)\n"); }; sub daemon_hup() { send_sig(1); }; sub daemon_stop() { send_sig(15); }; sub make_dirs() { for my $dir ( Echolot::Config::get()->{'resultdir'}, Echolot::Config::get()->{'thesaurusdir'}, ) { if ( ! -d $dir ) { mkdir ($dir, 0755) or confess ("Cannot create directory $dir: $!\n"); }; }; my @dirs = ( Echolot::Config::get()->{'private_resultdir'}, Echolot::Config::get()->{'gnupghome'}, Echolot::Config::get()->{'mixhome'}, Echolot::Config::get()->{'tmpdir'}, Echolot::Config::get()->{'storage'}->{'File'}->{'basedir'}, Echolot::Config::get()->{'mailerrordir'}, Echolot::Config::get()->{'mailerrordir'}.'/cur', Echolot::Config::get()->{'mailerrordir'}.'/tmp', Echolot::Config::get()->{'mailerrordir'}.'/new'); push @dirs, ( Echolot::Config::get()->{'mailin'}.'/cur', Echolot::Config::get()->{'mailin'}.'/tmp', Echolot::Config::get()->{'mailin'}.'/new' ) if (-d Echolot::Config::get()->{'mailin'}); for my $dir (@dirs) { if ( ! -d $dir ) { mkdir ($dir, 0700) or confess ("Cannot create directory $dir: $!\n"); }; }; }; sub hup_if_wanted($) { my ($nohup) = @_; if (!$nohup && pid_exists(0)) { daemon_hup() } else { print "Don't forget to run $PROGRAM_NAME process.\n"; }; }; ($EUID == 0) and die("$PROGRAM_NAME should not be run as root.\n"); my $params = { basedir => $Bin }; $params->{'basedir'} = $ENV{'ECHOLOT_HOME'} if (defined $ENV{'ECHOLOT_HOME'}); Getopt::Long::config('bundling'); if (!GetOptions ( 'help' => \$params->{'help'}, 'version' => \$params->{'version'}, 'verbose+' => \$params->{'verbose'}, 'nohup' => \$params->{'nohup'}, 'detach' => \$params->{'detach'}, 'process' => \$params->{'process'}, 'basedir' => \$params->{'basedir'}, 'quiet' => \$params->{'quiet'}, )) { die ("$PROGRAM_NAME: Usage: $PROGRAM_NAME [-fwhv]\n"); }; if ($params->{'help'}) { print ("Usage: $PROGRAM_NAME [options] command\n"); print ("See man pingd or perldoc pingd for more info.\n"); print ("echolot $VERSION - (c) 2002, 2003, 2004 Peter Palfrader \n"); print ("http://alioth.debian.org/projects/echolot/\n"); print ("\n"); print ("Commands:\n"); print (" start starts echolot pingd\n"); print (" signals pingd to ... \n"); print (" stop ... shutdown\n"); print (" process ... reopen outfile and process commands\n"); print (" add ... add a remailer address\n"); print (" delete ... delete a remailer address\n"); print (" disable ... disable a remailer\n"); print (" enable ... enable a remailer\n"); print (" set ... set remailer options\n"); print (" setremailercaps ... set remailer capabilities manually\n"); print (" deleteremailercaps ... delete remailer capabilities manually\n"); print (" getkeyconf ... request remailer-xxx data immediatly\n"); print (" sendpings ... request immediate sending of pings\n"); print (" sendchainpings ... request immediate sending of chainpings\n"); print (" buildstats ... build remailer stats immediatly\n"); print (" buildkeys ... buid keyrings immediatly\n"); print (" buildthesaurus ... build thesaurus immediatly\n"); print (" buildfromlines ... build fromlines immediatly\n"); print (" summary ... print status summary to log\n"); print (" dumpconf ... dump configuration\n"); exit 0; }; if ($params->{'version'}) { print ("echolot $VERSION\n"); print ("(c) 2002, 2003, 2004 Peter Palfrader \n"); print ("http://alioth.debian.org/projects/echolot/\n"); exit 0; }; $params->{'quiet'} = undef if ($params->{'verbose'}); my $COMMAND = shift @ARGV; die ("command required\n") unless defined $COMMAND; Echolot::Config::init( $params ); chdir( Echolot::Config::get()->{'homedir'} ); Echolot::Globals::init( version => $VERSION); if ($COMMAND eq 'add' || $COMMAND eq 'delete') { command_adddelete($COMMAND, @ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'set') { command_set(@ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'enable' || $COMMAND eq 'disable') { command_enabledisable($COMMAND, @ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'deleteremailercaps') { command_deleteremailercaps(@ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'setremailercaps') { command_setremailercaps(@ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'getkeyconf') { command_getkeyconf(@ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'sendpings') { command_sendpings(@ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'sendchainpings') { command_sendchainpings(@ARGV); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'buildstats') { Echolot::Commands::addCommand("buildstats"); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'buildkeys') { Echolot::Commands::addCommand("buildkeys"); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'buildthesaurus') { Echolot::Commands::addCommand("buildthesaurus"); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'buildfromlines') { Echolot::Commands::addCommand("buildfromlines"); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'summary') { Echolot::Commands::addCommand("summary"); hup_if_wanted($params->{'nohup'}); } elsif ($COMMAND eq 'process') { daemon_hup(); } elsif ($COMMAND eq 'stop') { daemon_stop(); } elsif ($COMMAND eq 'start') { # FIXME: remove stale pid files die ("Pidfile '".Echolot::Config::get()->{'pidfile'}."' exists\n") if pid_exists(1); Echolot::Log::init(); make_dirs(); Echolot::Config::check_binaries(); if ($params->{'detach'}) { print "Detaching.\n" unless ($params->{'quiet'}); Echolot::Log::debug("Detaching."); exit(0) if (fork()); POSIX::setsid(); exit(0) if (fork()); my $logfile = Echolot::Config::get()->{'logfile'}; open (STDOUT, ">>$logfile") or die ("Cannot open '$logfile' as STDOUT\n"); open (STDERR, ">&STDOUT") or die ("Cannot dup STDOUT as STDERR\n"); open (STDIN , "{'process'} ); Echolot::Log::info "Shutdown complete."; } else { daemon_run( $params->{'process'} ); }; } elsif ($COMMAND eq 'dumpconf') { Echolot::Config::dump(); } elsif ($COMMAND eq 'convert') { Echolot::Globals::initStorage(); setSigHandlers(); Echolot::Globals::get()->{'storage'}->convert(); Echolot::Globals::get()->{'storage'}->commit(); Echolot::Globals::get()->{'storage'}->finish(); } else { die ("Command $COMMAND unknown"); }; exit 0; # vim: set ts=4 shiftwidth=4: