=pod =head1 NAME pingd.conf - configuration file for the echolot ping daemon =head1 DESCRIPTION The file B sets configuration parameteres for the echolot pingd(1). It is a perl script that gets eval()ed from withing pingd. It has to set the values in the $CONFIG hash. =cut =head1 OPTIONS =head2 REQUIRED OPTIONS =over =item B A short name for your site/pinger. Is used in the statistics produced. Default: none Example: 'sitename' => 'testsite', =item B The local part of the pingers email address. In C the localpart is C. Default: none Example: 'my_localpart' => 'pinger', =item B The domain part of the pingers email address. In C the localpart is C. Default: none Example: 'my_domain' => 'example.com', =item B The email address of the human operator that runs this pinger. Default: none Example: 'operator_address' => 'remop@example.org', It is used in several templates. =back =head2 SYSTEM SPECIFIC OPTIONS =over =item B The B parameter specifies the separator between user names and address extensions (user+foo). Default: 'recipient_delimiter' => '+', Example: 'recipient_delimiter' => '-', =item B Where to read random data from. Default: 'dev_random' => '/dev/random', Example: 'dev_random' => '/dev/urandom', =item B Path to the sendmail binary. It is expected to accept the C<-f> and C<-t> parameters. Default: 'sendmail' => '/usr/sbin/sendmail', Example: 'sendmail' => '/usr/lib/sendmail', =back =head2 MAGIC NUMBERS =over =item B [integer] Echolot uses email addresses like C. MAC is Message Authentification Code used to verify that the address was actually generated by this pinger using a secret which is set from random data the first time you run B. Echolot uses MD5 as the MAC hash function. B is the number of characters to include in the email address. Default: 'hash_len' => 8, Example: 'hash_len' => 4, =back =head2 NEW REMAILERS =over =item B [bool] Query new remailers for remailer-xxx replies by default. Default: 'fetch_new' => 1, Example: 'fetch_new' => 0, =item B [bool] Ping new remailers by default. Default: 'ping_new' => 1, Example: 'ping_new' => 0, =item B [bool] Show new remailers in public stats by default. Default: 'show_new' => 1, Example: 'show_new' => 0, =back =head2 STATISTICS GENERATION =over =item B [bool] Also build sperate rlists with data from only DSA pings, only RSA pings and only plaintext pings. Default: 'seperate_rlists' => 0, Example: 'seperate_rlists' => 1, =item B [bool] Build a combinded list of all different stats too. While this is no standard format it is nice to read for a human eye. Default: 'combined_list' => 0, Example: 'combined_list' => 1, =item B [bool] Collect Thesaurus data and build Thesaurus' Index. Default: 'thesaurus' => 1, Example: 'thesaurus' => 0, =item B In statistics output remailers are sorted by reliability as the primary key. The secondary key usually is nickname. If you prefer to sort by latency rather than nick set this to 1 (-1 if you want to reverse the order). Default: 'stats_sort_by_latency' => 0, Example: 'stats_sort_by_latency' => 1, =back =head2 TIMERS AND COUNTERS =over =item B [seconds] How often to process incoming email. Default: 'processmail' => 60, # every minute Example: 'processmail' => 5*60, # every 5 minutes =item B [seconds] How often to build mlist et al. Default: 'buildstats' => 5*60, # every 5 minutes Example: 'buildstats' => 60*60, # hourly =item B [seconds] How often to build keyrings. Default: 'buildkeys' => 8*60*60, # every 8 hours Example: 'buildkeys' => 24*60*60, # daily =item B [seconds] How often to update thesaurus index page. Default: 'buildthesaurus' => 60*60, # hourly Example: 'buildthesaurus' => 24*60*60, # daily =item B [seconds] How often to check for prospective new remailer addresses and commit them to the list of remailers. Default: 'commitprospectives' => 8*60*60, # every 8 hours Example: 'commitprospectives' => 24*60*60, # daily =item B [seconds] How often to expire old keys, pingds and remailers Default: 'expire' => 24*60*60, # daily Example: 'expire' => 8*60*60, # every 8 hours =item B [seconds] =item B [integer] How often to query remailers for new keys and configuration data (remailer-xxx). Some requests are sent every B seconds. The same request to the same remailer is sent only every B time. Default: 'getkeyconf_interval' => 5*60, # send out requests every 5 minutes 'getkeyconf_every_nth_time' => 24*60/5, # send out the same request to the same remailer once a day Example: 'getkeyconf_interval' => 10*60, 'getkeyconf_every_nth_time' => 2*24*60/10, # new request every other day =item B [seconds] How often to check assumed dead remailers for resurrection. Default: 'getkeyconf' => 7*24*60*60, # weekly Example: 'getkeyconf' => 24*24*60*60, # every other week =item B [seconds] =item B [integer] How often to send pings. Pings are sent every B seconds. The same remailer is pinged every B. This is done this way in order to avoid spikes. Default: 'pinger_interval' => 5*60, # send out pings every 5 minutes 'ping_every_nth_time' => 48, # send out pings to the same remailer every 48 calls, i.e. every 4 hours Example: 'pinger_interval' => 60*60, # send out pings every minute 'ping_every_nth_time' => 60, # send out pings to the same remailer every 60 calls, i.e. every hour =item B [integer] How many times to request remailer-xxx from a remailer (done every B seconds, daily per default) without a reply before it is asumed dead. Default: 'addresses_default_ttl' => 5, # getkeyconf seconds (days if getkeyconf is 24*60*60, the default) Example: 'addresses_default_ttl' => 7, =item B [integer] How many times to request remailer-xxx from a assumed dead remailer (done every B seconds, weekly per default) without a reply before it is really considered dead. Default: 'check_resurrection_ttl' => 8, # check_resurrection seconds (weeks if check_resurrection is 7*24*60*60, the default) Example: 'check_resurrection_ttl' => 4, =item B [seconds] How long to keep information about a prospective address in the database. Addresses that are not committed to the list of remailer addresses are expired after that time. Default: 'prospective_addresses_ttl' => 5*24*60*60, # 5 days Example: 'prospective_addresses_ttl' =>14*24*60*60, # 2 weeks =item B [integer] How many different remailer need to list an address in Reliable's remailer-conf reply to get it committed to the list of remailer addresses. Default: 'reliable_auto_add_min' => 3, Example: 'reliable_auto_add_min' => 5, =item B [seconds] After which time to expire received keys if they were not updated by remailer-key replies. Default: 'expire_keys' => 5*24*60*60, # 5 days Example: 'expire_keys' => 7*24*60*60, # 1 week =item B [seconds] After which time to expire received remailer-conf replies. Default: 'expire_confs' => 5*24*60*60, # 5 days Example: 'expire_confs' => 7*24*60*60, # 1 week =item B [seconds] After which time to expire pings. 12 is the value of choice because that is the time frame the statistics show. You should not make this smaller than 12 days. Default: 'expire_pings' => 12*24*60*60, # 12 days =item B [seconds] After which time to expire files in the thesaurus directory. Default: 'expire_thesaurus' => 21*24*60*60, # 2 weeks Example: 'expire_thesaurus' => 7*24*60*60, # 1 week =back =head2 DIRECTORIES AND FILES =over =item B The base directory of the echolot installation. All other filenames and directorynames are local to this directory. B changes into this directory upon startup. Default: The directory in which pingd is. Example: 'homedir' => '/home/pinger/echolot', =item B The Maildir directory which is searched for new messages. Default: 'mailindir' => 'mail', =item B The Maildir directory where messages are put that could not be parsed. Default: 'mailerrordir' => 'mail-errors', =item B The directory where statistics and keyrings are put. Default: 'resultdir' => 'results', =item B The directory where Thesaurus data is put. Default: 'thesaurusdir' => 'results/thesaurus', =item B The Thesaurus index file. Default: 'thesaurusindexfile' => 'results/thesaurus/index.html', =item B The directory where private stats and keyrings are put (Remailers that have show set to false are shown here too). Default: 'private_resultdir' => 'results', =item B The directory which is used as temporal GnuPG home for all keyring and encryption/decryption actions. Default: 'gnupghome' => 'gnupghome', =item B Name of the GnuPG executeable. If it is not in your PATH make sure to include path information. If B is an empty string, the C default (usually B) is used. Default: 'gnupg' => '', Example: 'gnupg' => '/home/pinger/bin/myGnuPG', =item B The directory which is used as temporal Mixmaster home for all keyring and encryption/decryption actions. Default: 'mixhome' => 'mixhome', Example: 'mixmaster' => '/home/pinger/Mix', =item B Name of the mixmaster executeable. If it is not in your PATH make sure to include path information. Default: 'mixmaster' => 'mix', Example: 'mixmaster' => '/home/pinger/Mix/mix', =item B General purpose temp directory. Make sure it is not shared with other applications. Default: 'tmpdir' => 'tmp', =item B A file where commands to the daemon process are stored. The client puts commands (like add a new remailer) in it and then sends a HUP to the daemon process which reads and empties the file. Default: 'commands_file' => 'commands.txt', =item B The daemon's pid file. The daemon's Process ID is stored in this file. As long as it exists pingd refuses to start up in daemon mode. Default: 'pidfile' => 'pingd.pid', =item B File listing broken type I remailer chains. If it does not exist, the part is skipped in generated stats. Otherwise its content is copied in verbatim. Default: 'broken1' => 'broken1.txt', (havenco cmeclax) (frog3 nycrem) =item B File listing broken type II remailer chains. If it does not exist, the part is skipped in generated stats. Otherwise its content is copied in verbatim. Default: 'broken2' => 'broken2.txt', Example conent: (freedom lcs) (* xganon) =item B File listing remailers that have the same operator or share a machine or other important infrastructure. If it does not exist, the part is skipped in generated stats. Otherwise its content is copied in verbatim. Default: 'sameop' => 'sameop.txt', Example conent: (xganon2 xganon) (cracker redneck) =back =head2 PINGING TYPES =over =item B B determines which ping types are sent. It is a hash that has the following keys: =over =item B Send out CPunk pings to CPunk remailers with their DSA key. =item B Send out CPunk pings to CPunk remailers with their RSA key. =item B Send out plaintext pings to CPunk remailers that don't have pgponly in their capsstring. =item B Pings mixmaster remailers. =back Default: 'do_pings' => { 'cpunk-dsa' => 1, 'cpunk-rsa' => 1, 'cpunk-clear' => 1, 'mix' => 1 }, =back =head2 TEMPLATES =over =item B The template files are used to generate the HTML version of all echolot output. It is a hash that has the following keys: B, B, B, B, B, B, B, B, B, B, B, and B. Default: 'templates' => { 'thesaurusindexfile' => 'templates/thesaurusindex.html', 'mlist' => 'templates/mlist.html', 'mlist2' => 'templates/mlist2.html', 'rlist' => 'templates/rlist.html', 'rlist-rsa' => 'templates/rlist-rsa.html', 'rlist-dsa' => 'templates/rlist-dsa.html', 'rlist-clear' => 'templates/rlist-clear.html', 'rlist2' => 'templates/rlist2.html', 'rlist2-rsa' => 'templates/rlist2-rsa.html', 'rlist2-dsa' => 'templates/rlist2-dsa.html', 'rlist2-clear' => 'templates/rlist2-clear.html', 'clist' => 'templates/clist.html', }; =back =head2 STRINGS =over =item B The text to send along with remailer-xxx queries. The tempalte variables address and operator_address are substituted for their real values. Default: 'remailerxxxtext' => "Hello,\n". "\n". "This message requests remailer configation data. The pinging software thinks\n". " is a remailer. Either it has been told so by the\n". "maintainer of the pinger or it found the address in a remailer-conf or\n". "remailer-key reply of some other remailer.\n". "\n". "If this is _not_ a remailer, you can tell this pinger that and it will stop\n". "sending you those requests immediatly (otherwise it will try a few more times).\n". "Just reply and make sure the following is the first line of your message:\n". " not a remailer\n". "\n". "If you want to talk to a human please mail .\n", =back =head1 AUTHOR Peter Palfrader Epeter@palfrader.orgE =head1 BUGS Please report them at EURL:http://savannah.gnu.org/bugs/?group=echolotE =cut